IBIC2023 - List of Keywords (ground-motion)

Paper	Title	Other Keywords	Page
MOP031	A Study Into the Long-Term Stability of Front End X-Ray Beam Position Monitor Support Columns at Diamond Light Source	laser, experiment, resonance, damping	90
	C.E. Houghton, C. Bloomer, L. Bobb, D. Crivelli, J.E. Melton, H. Patel DLS, Harwell, United Kingdom
	Sand-filled steel columns are used at Diamond Light Source to support front end X-ray beam position monitors. This approach is chosen due to the relatively large thermal mass of the sand being considered useful to reduce the rate at which expansion and contraction of the column occurred as the storage ring tunnel temperature varied, particularly during machine start-up. With the higher requirements for mechanical stability for the upcoming Diamond-II upgrade, there is now a need to assess and quantify the current system’s impact on X-ray beam movement. A study of thermal and mechanical stability has been carried out to quantify the stability performance of the front end X-ray beam position monitor’s columns and the impact that column motion may have on the X-ray beam position measurement. Measurements have been made over a range of different timescales, from 250 Hz up to 2 weeks. The measured stability of the support column is presented, showing that it meets our Diamond-II stability requirements. A comparison of the stability of the column with and without a sand filling is presented.
	Poster MOP031 [0.594 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-IBIC2023-MOP031
About •	Received ※ 06 September 2023 — Revised ※ 07 September 2023 — Accepted ※ 13 September 2023 — Issue date ※ 17 September 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOP031

A Study Into the Long-Term Stability of Front End X-Ray Beam Position Monitor Support Columns at Diamond Light Source

laser, experiment, resonance, damping

90

C.E. Houghton, C. Bloomer, L. Bobb, D. Crivelli, J.E. Melton, H. Patel
DLS, Harwell, United Kingdom

Sand-filled steel columns are used at Diamond Light Source to support front end X-ray beam position monitors. This approach is chosen due to the relatively large thermal mass of the sand being considered useful to reduce the rate at which expansion and contraction of the column occurred as the storage ring tunnel temperature varied, particularly during machine start-up. With the higher requirements for mechanical stability for the upcoming Diamond-II upgrade, there is now a need to assess and quantify the current system’s impact on X-ray beam movement. A study of thermal and mechanical stability has been carried out to quantify the stability performance of the front end X-ray beam position monitor’s columns and the impact that column motion may have on the X-ray beam position measurement. Measurements have been made over a range of different timescales, from 250 Hz up to 2 weeks. The measured stability of the support column is presented, showing that it meets our Diamond-II stability requirements. A comparison of the stability of the column with and without a sand filling is presented.

Poster MOP031 [0.594 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-IBIC2023-MOP031

About •

Received ※ 06 September 2023 — Revised ※ 07 September 2023 — Accepted ※ 13 September 2023 — Issue date ※ 17 September 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)